Montero V6-3.8L SOHC (2005)
3. Measure the voltage between terminal 62 and ground. The voltage should measure approximately 12 volts (battery positive voltage).
Q: Is battery positive voltage (approximately 12 volts) present?
YES: Replace the combination meter and then go to Step 9.
NO: Go to Step 6.
STEP 6. Check the following connector.
^
Combination meter connector D-03
Check connector for loose, corroded or damaged terminals, or terminals pushed back in the connector.
Q: Are the connector and terminals in good condition?
YES: Go to Step 7.
NO: Repair the faulty connector or terminal and then go to Step 9.
STEP 7. Check the following harness wire.