Montero V6-3.8L SOHC (2005)
4. A message of completing geomagnetization calibration is displayed.
-
When pressing "DISP" and "ADJ" switches
-
When pressing function switch 3 (CANCEL)
-
When operating auto A/C and audio
-
When turning the ignition switch to the "OFF" (LOCK) position
Demagnetization and correction method
1. Demagnetize the body using a commercial demagnetizer.
2. While keeping the distance between the tip of demagnetizer and the roof panel to approximately 5 cm (2.0 inches), move the demagnetizer slowly
with a sweeping manner on the rear-half surface of roof panel.
CAUTION: If the tip of demagnetizer touches the roof panel, the magnetizing condition of body becomes worse to the contrary. Absolutely avoid
this.
3. Slowly draw the demagnetizer apart from the body. Turn OFF the switch of demagnetizer when it is apart from the body more than 5 cm.