mitsubishi Workshop Repair Guides

Mitsubishi Workshop Service and Repair Manuals

Reading and Clearing Diagnostic Trouble Codes|Page 6054 > < Reading and Clearing Diagnostic Trouble Codes|Page 6052
Page 8
background image

1. Do not disconnect RV meter connector D-07.

2. Measure the voltage between terminal 26 and ground by backprobing.

Q: Is the voltage approximately 12 volts (battery positive voltage)?

YES: There is no action to be taken. 

NO: Go to Step 3.

STEP 3.Check RV meter connector D-07 for loose, corroded or damaged terminals, or terminals pushed back in the connector.

Q: Are RV meter connector D-07 in good condition?

YES: Go to Step 4.

NO: Repair or replace it. Refer to Harness Connector Inspection. The RV meter display should operate normally.

Reading and Clearing Diagnostic Trouble Codes|Page 6054 > < Reading and Clearing Diagnostic Trouble Codes|Page 6052