mitsubishi Workshop Repair Guides

Mitsubishi Workshop Service and Repair Manuals

Reading and Clearing Diagnostic Trouble Codes|Page 6065 > < Reading and Clearing Diagnostic Trouble Codes|Page 6063
Page 19
background image

STEP 5. Check ambient air temperature sensor connector A-29 and RV meter connector D-08 <vehicles with automatic air conditioning
system> or RV meter connector D-07 <vehicles with manual air conditioning system> for loose, corroded or damaged terminals, or terminals
pushed back in the connector.

Q: Are ambient air temperature sensor connector A-29 and RV meter connector D-08 <vehicles with automatic air conditioning system> or RV meter
connector D-07 <vehicles with manual air conditioning system> in good condition?

YES <Vehicles with automatic air conditioning system> : Go to Step 6.

YES <Vehicles with manual air conditioning system> : Go to Step 8.

NO: Repair or replace them. Refer to Harness Connector Inspection.

STEP 6. Check the RV meter and A/C-ECU <vehicles with automatic air conditioning system> circuit by backprobing.

1. Do not disconnect RV meter connector D-08. 
2. Ignition switch: "ACC" position.

Reading and Clearing Diagnostic Trouble Codes|Page 6065 > < Reading and Clearing Diagnostic Trouble Codes|Page 6063