Montero V6-3.8L SOHC (2005)
Odometer: Component Tests and General Diagnostics
Introduction
INTRODUCTION TO RV METER
The RV meter has the following function for the failure diagnosis service, and is used for the system check of units such as the main body and the sensor.
By virtue of this service function, the cause of failure can be conjectured.
FAILURE DIAGNOSIS SERVICE FUNCTION
The RV meter is equipped with the following functions for the failure diagnosis service.
Start service function
1. Press the "ADJ" switch with the ignition switch at "LOCK" (OFF) position, and while keeping on pressing, turn the ignition switch to the "ACC"
or "ON." position. When the ADJ switch is pressed continuously for more than five seconds, the service function is activated at the same time with
the reception signal (pip sound) and the first menu screen of the service mode is displayed.
2. When respective function switches are pressed on this screen, the screen is switched as follows.
-
When the function switch 1 [AUTO] is pressed, the screen is switched to the automatic check mode.
-
When the function switch 2 [DIAG] is pressed, the screen is switched to the diagnosis mode.
-
When the function switch 3 [HISTORY] is pressed, the screen is switched to the history mode.
-
When the "ADJ" switch [NEXT] is pressed, the screen is switched to the service mode second menu screen.
-
When the "DISP" switch [NEXT] is pressed, the service mode is terminated.
