Montero V6-3.8L SOHC (2005)
1. Adjust the camber and caster until they meets the standard value by turning the lower arm camber adjusting bolt according to the camber and
caster reference table.
2. After adjusting the camber, the toe should be adjusted.
Camber and caster reference table
How to read this table (example)
If the camber difference
-0°35' and the caster difference is 0°18' by comparing the measurement value with the standard value, rotate the front
adjusting cam by
1.5 graduations and the rear adjusting cam by 2.5 graduations to the opposite direction against the "A" direction.
NOTE: Solid lines show caster, broken lines show camber.
UPPER ARM BALL JOINT END PLAY CHECK
1. Raise the vehicle.
2. Move the upper arm up and down with your hands to check for an excessive play in the axial direction of the ball joint. If there is an excessive
play, replace the upper arm ball joint assembly.