mitsubishi Workshop Repair Guides

Mitsubishi Workshop Service and Repair Manuals

Wheels and Tires|Tires > < Tire Pressure Sensor ID Check|Page 1111
Page 2
background image

vehicle (turn the tire) by approximately half a turn of the tire. Then attempt to activate the TPMS transmitter.

10. Check the data on the PC display.

NOTE:  If the spare tire pressure sensor cannot be checked, bring the spare tire near one of the road tires. Then check the tire pressure sensor.
There is no TPMS antenna for the spare tire, so this work helps the road tire TPMS antenna receive signal from the spare tire securely.

CAUTION:  If the spare tire is removed, always reinstall it as shown. If the spare tire valve (TPMS transmitter) is not positioned as shown, the
roll switch, which is incorporated in the TPMS transmitter, may operate. In that case, the system may determine the spare tire as a road tire
incorrectly.

11. After tire pressure sensor check, turn the ignition switch to the "LOCK" (OFF) position.
12. Remove scan tool MB991958.

Wheels and Tires|Tires > < Tire Pressure Sensor ID Check|Page 1111