Montero V6-3.8L SOHC (2005)
STEP 7. Check ETACS-ECU connector D-224 for loose, corroded or damaged terminals, or terminals pushed back in the connector.
Q: Is ETACS-ECU connector D-224 in good condition?
YES: Go to Step 8.
NO: Repair or replace the damaged component(s). Refer to Harness Connector Inspection. The system should communicate with the column switch
(column-ECU) normally.
STEP 8. Check the wiring harness between column switch connector D-203 (terminal 3) and ETACS-ECU connector D-224 (terminal 21).
Q: Is the wiring harness between column switch connector D-203 (terminal 3) and ETACS-ECU connector D-224 (terminal 21) in good condition?
YES: Go to Step 9.
NO: The wiring harness may be damaged or the connector(s) may have loose, corroded or damaged terminals, or terminals pushed back in the
connector. Repair the wiring harness as necessary. The system should communicate with the column switch (column-ECU) normally.
