Montero V6-3.8L SOHC (2005)
Rear passenger (RH) : Go to Step 31.
STEP 5. Check front power window sub-switch (RH) connector H-16 for loose, corroded or damaged terminals, or terminals pushed back in
the connector.
Q: Is front power window sub-switch (RH) connector H-16 in good condition?
YES: Go to Step 6.
NO: Repair or replace the damaged component(s). Refer to Harness Connector Inspection. Verify that the front power window sub-switch (RH)
should now work normally.
STEP 6. Check the front power window sub-switch (RH) for continuity.
1. Remove the front power window sub-switch (RH). Refer to passenger's Door-Door Trim and Waterproof Film.
2. Check continuity when the front power window sub-switch (RH) is operated to "UP" or "DOWN" position.
Q: Is the front power window sub-switch (RH) normal?
YES: Go to Step 7.
NO: Replace the front power window sub-switch (RH). Verify that the front power window sub-switch (RH) should now work normally.
