Montero V6-3.8L SOHC (2005)
STEP 30. Check the harness wiring between rear power window sub-switch (LH) connector H-02 (terminal 7) and rear power window motor
(LH) connector H-11 (terminal 2).
Q: Is the harness wiring between rear power window sub-switch (LH) connector H-02 (terminal 7) and rear power window motor (LH) connector H-11
(terminal 2) in good condition?
YES: Replace the power window main switch. Verify that the rear power window sub-switch (LH) should now work normally.
NO: The wiring harness may be damaged or the connector(s) may have loose, corroded or damaged terminals, or terminals pushed back in the
connector. Repair the wiring harness as necessary. Verify that the rear power window sub-switch (LH) should now work normally.
STEP 31. Check rear power window sub-switch (RH) connector H-19 for loose, corroded or damaged terminals, or terminals pushed back in
the connector.
Q: Is rear power window sub-switch (RH) connector H-19 in good condition?
YES: Go to Step 32.
NO: Repair or replace the damaged component(s). Refer to Harness Connector Inspection. Verify that the rear power window sub-switch (RH) should
now work normally.
Part 3 of 3
STEP 32. Check the rear power window sub-switch (RH) for continuity.
1. Remove the rear power window sub-switch (RH). Refer to passenger's Door-Door Trim and Waterproof Film.
