Montero V6-3.8L SOHC (2005)
STEP 4. Check the wiring harness between headlight (LH) connector A-20 (terminal 2) and ground.
Q: Is the wiring harness between headlight (LH) connector A-20 (terminal 2) and ground in good condition?
YES: No action is necessary and testing is complete.
NO: The wiring harness may be damaged or the connector(s) may have loose, corroded or damaged terminals, or terminals pushed back in the
connector. Repair the wiring harness as necessary. Verify that the headlights illuminate normally.
STEP 5. Check headlight (RH) bulb.
1. Remove the headlight (RH) bulb.
2. Verify that the headlight (RH) bulb is not damaged or burned out.
Q: Is headlight (RH) bulb normal?
YES: Go to Step 6.
NO: Replace the headlight (RH) bulb. Verify that the headlights illuminate normally.
STEP 6. Check headlight (RH) connector A-32 for loose, corroded or damaged terminals, or terminals pushed back in the connector.
Q: Is headlight (RH) connector A-32 in good condition?
YES: Go to Step 7.
NO: Repair or replace the damaged component(s). Refer to Harness Connector Inspection. Verify that the headlights illuminate normally.