Montero V6-3.8L SOHC (2005)
STEP 7. Check front-ECU connector A-07X for loose, corroded or damaged terminals, or terminals pushed back in the connector.
Q: Is front-ECU connector A-07X in good condition?
YES: Go to Step 8.
NO: Repair or replace the damaged component(s). Refer to Harness Connector Inspection. Verify that the fog lights illuminate normally.
STEP 8. Check the wiring harness between fog light relay connector A-13X (terminal 1) and front-ECU connector A-07X (terminal 1).
Q: Is the wiring harness between fog light relay connector A-13X (terminal 1) and front-ECU connector A-07X (terminal 1) in good condition?
YES: Go to Step 9.
NO: The wiring harness may be damaged or the connector(s) may have loose, corroded or damaged terminals, or terminals pushed back in the
connector. Repair the wiring harness as necessary. Verify that the fog lights illuminate normally.