Montero V6-3.8L SOHC (2005)
STEP 9. Check fog light (LH) connector A-21 for loose, corroded or damaged terminals, or terminals pushed back in the connector.
Q: Is fog light (LH) connector A-21 in good condition?
YES: Go to Step 10.
NO: Repair or replace the damaged component(s). Refer to Harness Connector Inspection. Verify that the fog lights illuminate normally.
STEP 10. Check the wiring harnesses among fog light relay connector A-13X (terminal 5) and fog light (LH) connector A-21 (terminal 1).
NOTE: Also check joint connector A-15 and intermediate connector A-25 for loose, corroded, or damaged terminals, or terminals pushed back in the
connector. If joint connector A-15 or intermediate connectors A-25 is damaged, repair or replace the damaged component(s) as described in Harness
Connector Inspection.
Q: Are the wiring harnesses among fog light relay connector A-13X (terminal 5) and fog light (LH) connector A-21 (terminal 1) in good condition?