Montero V6-3.8L SOHC (2005)
STEP 7. Check the wiring harness between joint connector (2) A-15 (terminal 3) and fog light (LH) connector A-21 (terminal 1).
NOTE: Also check intermediate connector A-25 for loose, corroded, or damaged terminals, or terminals pushed back in the connector. If intermediate
connector A-25 is damaged, repair or replace the damaged component(s) as described in Harness Connector Inspection.
Q: Is the wiring harness between joint connector (2) A-15 (terminal 3) and fog light (LH) connector A-21 (terminal 1) in good condition?
YES: No action is necessary and testing is complete.
NO: The wiring harness may be damaged or the connector(s) may have loose, corroded or damaged terminals, or terminals pushed back in the
connector. Repair the wiring harness as necessary. Verify that the fog lights illuminate normally.
STEP 8. Check the fog light bulb (RH).
1. Remove the fog light bulb (RH).
2. Verify that the fog light bulb (RH) is not damaged or burned out.
Q: Is the fog light bulb (RH) in good condition?
YES: Go to Step 9.
NO: Replace the fog light bulb (RH). Verify that the fog lights illuminate normally.
STEP 9. Check fog light (RH) connector A-31 for loose, corroded or damaged terminals, or terminals pushed back in the connector.
Q: Is fog light (RH) connector A-31 in good condition?
YES: Go to Step 10.
