Montero V6-3.8L SOHC (2005)
STEP 8. Check the wiring harness between dome light connector F-03 (terminal 2) and ETACS-ECU connector D-222 (terminal 18).
NOTE: Also check intermediate connector D-26 and junction block connector D-207 for loose, corroded, or damaged terminals, or terminals pushed
back in the connector. If junction block connector D-207 or intermediate connector D-26 is damaged, repair or replace the damaged component(s) as
described in Harness Connector Inspection.
Q: Is the wiring harness between dome light connector F-03 (terminal 2) and ETACS-ECU connector D-222 (terminal 18) in good condition?
YES: Replace the ETACS-ECU. Verify that the dome light illuminates normally.
NO: Repair the wiring harness. Verify that the dome light illuminates normally.
