Montero V6-3.8L SOHC (2005)
STEP 18. Check the wiring harness between dome light connector F-03 (terminal 1) and fusible link (1).
NOTE: Also check intermediate connectors D-26, D-28, junction block connectors D-207 and D-221 for loose, corroded, or damaged terminals, or
terminals pushed back in the connector. If intermediate connector D-26, D-28, junction block connector D-207 or D-221 is damaged, repair or replace
the damaged component(s) as described in Harness Connector Inspection.
Q: Is the wiring harness between dome light connector F-03 (terminal 1) and fusible link (1) in good condition?
YES: No action to be taken.
NO: Repair the wiring harness. Verify that the dome light illuminates normally.
STEP 19. Check the cargo space light.
Q: Does the dome light illuminate when the cargo space light switch is turned to the "ON" position?
YES: Go to Step 20.
NO: Go to Step 22.
