mitsubishi Workshop Repair Guides

Mitsubishi Workshop Service and Repair Manuals

Initial Inspection and Diagnostic Overview|Page 2291 > < Initial Inspection and Diagnostic Overview|Page 2289
Page 365
background image

STEP 25. Check the wiring harness between cargo space light connector F-08 (terminal 1) and fusible link (1).

NOTE:  Also check intermediate connectors D-26, D-28, junction block connectors D-207 and D-221 for loose, corroded, or damaged terminals, or
terminals pushed back in the connector. If intermediate connector D-26, D-28, junction block connector D-207 or D-221 is damaged, repair or replace
the damaged component(s) as described in Harness Connector Inspection.

Q: Is the wiring harness between cargo space light connector F-08 (terminal 1) and fusible link (1) in good condition?

YES: No action to be taken.

NO: Repair the wiring harness. Verify that the cargo space light illuminates normally.

STEP 26. Check the rear personal light (LH).

Q: Does the dome light illuminate when the rear personal light (LH) switch is turned to the "ON" position?

YES: Go to Step 27.

Initial Inspection and Diagnostic Overview|Page 2291 > < Initial Inspection and Diagnostic Overview|Page 2289