Montero V6-3.8L SOHC (2005)
STEP 40. Check the wiring harness between rear personal light (RH) connector F-04 (terminal 1) and fusible link (1).
NOTE: Also check intermediate connectors D-26, D-28, junction block connectors D-207 and D-221 for loose, corroded, or damaged terminals, or
terminals pushed back in the connector. If intermediate connector D-26, D-28, junction block connector D-207 or D-221 is damaged, repair or replace
the damaged component(s) as described in Harness Connector Inspection.
Q: Is the wiring harness between rear personal light (RH) connector F-04 (terminal 1) and fusible link (1) in good condition?
YES: Go to Step 41.
NO: Repair the wiring harness. Verify that the rear personal light (RH) illuminates normally.
