Montero V6-3.8L SOHC (2005)
1. Disconnect ETACS-ECU connector D-224, and measure at the wiring harness side.
2. The theft-alarm indicator light should illuminate when terminal 40 is grounded.
Q: Does the theft-alarm indicator light illuminate?
YES: Go to Step 9.
NO: Go to Step 4.
STEP 4. Check theft-alarm indicator light connector D-105 for loose, corroded or damaged terminals, or terminals pushed back in the
connector.
Q: Is theft-alarm indicator light connector D-105 in good condition?
YES: Go to Step 5.
NO: Repair or replace the damaged component(s). Refer to Harness Connector Inspection. The theft-alarm indicator light should illuminate, and the
theft-alarm system should be set normally.
STEP 5. Check the theft-alarm indicator light.
1. Remove the RV meter. Refer to RV meter.