mitsubishi Workshop Repair Guides

Mitsubishi Workshop Service and Repair Manuals

Initial Inspection and Diagnostic Overview|Page 2325 > < Initial Inspection and Diagnostic Overview|Page 2323
Page 399
background image

Horn And Theft-Alarm Horn Drive Circuit Part 2

CIRCUIT OPERATION

When the theft-alarm system is triggered, the ETACS-ECU sounds the theft-alarm horn and all the vehicle horns.

TECHNICAL DESCRIPTION (COMMENT)

If the theft-alarm horn and the vehicle horns do not sound when the theft-alarm system is triggered, the ETACS-ECU may be defective.

TROUBLESHOOTING HINTS

-

The theft-alarm horn may be defective

-

The horn may be defective

-

The theft-alarm horn relay may be defective

-

The horn relay may be defective

-

The ETACS-ECU may be defective

-

The wiring harness or connectors may have loose, corroded, or damaged terminals, or terminals pushed back in the connector

DIAGNOSIS

Required Special Tool:

-

MB991223: Harness Set

STEP 1. Check which horn is defective.

Check which horn does not sound when the theft-alarm system is triggered.

Q: Which horn does not sound?

Initial Inspection and Diagnostic Overview|Page 2325 > < Initial Inspection and Diagnostic Overview|Page 2323