mitsubishi Workshop Repair Guides

Mitsubishi Workshop Service and Repair Manuals

Initial Inspection and Diagnostic Overview|Page 2327 > < Initial Inspection and Diagnostic Overview|Page 2325
Page 401
background image

STEP 4. Check the theft-alarm horn relay.

Q: Is the theft-alarm horn relay normal?

YES: Go to Step 5.

NO: Replace the theft-alarm horn relay. All the vehicle horn (including the theft-alarm horn) should sound when the theft-alarm system is triggered.

STEP 5. Check the fusible link (1) line of the power supply circuit to the theft-alarm horn relay. Test at theft-alarm horn relay connector
A-11X.

1. Disconnect theft-alarm horn relay connector A-11X and measure the voltage available at the relay box side of the connector.

Initial Inspection and Diagnostic Overview|Page 2327 > < Initial Inspection and Diagnostic Overview|Page 2325