mitsubishi Workshop Repair Guides

Mitsubishi Workshop Service and Repair Manuals

Initial Inspection and Diagnostic Overview|Page 2330 > < Initial Inspection and Diagnostic Overview|Page 2328
Page 404
background image

STEP 9. Check theft-alarm horn relay connector A-11X and ETACS-ECU connector D-223 for loose, corroded or damaged terminals, or
terminals pushed back in the connector.

Q: Are theft-alarm horn relay connector A-11X and ETACS-ECU connector D-223 in good condition?

YES: Go to Step 10.

NO: Repair or replace the damaged component(s). Refer to Harness Connector Inspection. All the vehicle horn (including the theft-alarm horn)
should sound when the theft-alarm system is triggered.

Initial Inspection and Diagnostic Overview|Page 2330 > < Initial Inspection and Diagnostic Overview|Page 2328