Montero V6-3.8L SOHC (2005)
STEP 18. Check ETACS-ECU connector D-223 for loose, corroded or damaged terminals, or terminals pushed back in the connector.
Q: Is ETACS-ECU connector D-223 in good condition?
YES: Go to Step 19.
NO: Repair or replace the damaged component(s). Refer to Harness Connector Inspection. All the vehicle horn (including the theft-alarm horn)
should sound when the theft-alarm system is triggered.
STEP 19. Check the wiring harness between horn relay connector A-10X (terminal 1) and ETACS-ECU connector D-223 (terminal 42).
NOTE: Also check intermediate connector D-28 for loose, corroded, or damaged terminals, or terminals pushed back in the connector. If intermediate
connectors D-28 is damaged, repair or replace the damaged component(s) as described in Harness Connector Inspection.
Q: Is the wiring harness between horn relay connector A-10X (terminal 1) and ETACS-ECU connector D-223 (terminal 42) in good condition?
