Montero V6-3.8L SOHC (2005)
CAUTION: To prevent damage to scan tool MB991958, always turn the ignition switch to the "LOCK" (OFF) position before connecting or
disconnecting scan tool MB991958.
1. Connect the special tool. Refer to "How to connect SWS monitor". See: Reading and Clearing Diagnostic Trouble Codes/How to Connect SWS
Monitor
2. Turn the ignition switch to the "LOCK" (OFF) position. (3) Operate scan tool MB991958 according to the procedure below to display "ECU
COMM CHK."
1. Select "SYSTEM SELECT."
2. Select "SWS."
3. Select "SWS MONITOR."
4. Select "ECU COMM CHK."
4. Scan tool MB991958 should show "OK" on the "ECU COMM CHK" menu for the "COLUMN ECU" menu.
Q: Is "OK" displayed on the "COLUMN ECU" menu?
YES: Go to Step 2.
NO: Refer to Inspection Procedure A-2 "Communication with column switch (column-ECU) is not possible."
