Montero V6-3.8L SOHC (2005)
STEP 2. Check sunroof motor assembly connector F-02 and ETACS-ECU connector D-224 for loose, corroded or damaged terminals, or
terminals pushed back in the connector.
Q: Are sunroof motor assembly connector F-02 and ETACS-ECU connector D-224 in good condition?
YES: Go to Step 3.
NO: Repair or replace the damaged component(s). Refer to Harness Connector Inspection. If the sunroof operates normally, it indicates that a correct
signal is sent from the sunroof switch.