Montero V6-3.8L SOHC (2005)
Q: Is ETACS-ECU connector D-223 in good condition?
YES: Go to Step 15.
NO: Repair or replace the damaged component(s). Refer to Harness Connector Inspection. If the central door locking system works normally, input
signal from the door lock switch should be normal.
STEP 15. Check the wiring harness between power window main switch H-05 (terminal 8) and ground.
Q: Is the wiring harness between power window main switch connector H-05 (terminal 8) and ground in good condition?
YES: Replace the ETACS-ECU.
NO: The wiring harness may be damaged or the connector(s) may have loose, corroded or damaged terminals, or terminals pushed back in the
connector. Repair the wiring harness as necessary. If the central door locking system works normally, input signal from the door lock switch should be
normal.
STEP 16. Check ETACS-ECU connector D-223 for loose, corroded or damaged terminals, or terminals pushed back in the connector.
Q: Is ETACS-ECU connector D-223 in good condition?
YES: Go to Step 17.
NO: Repair or replace the damaged component(s). Refer to Harness Connector Inspection. If the central door locking system works normally, input
signal from the door lock switch should be normal.
