Montero V6-3.8L SOHC (2005)
STEP 7. Check the wiring harness between front-ECU connector A-08X (terminal 31) and the ground.
Q: Is the wiring harness between front-ECU connector A-08X (terminal 31) and ground in good condition?
YES: No action is necessary and testing is complete.
NO: The wiring harness may be damaged or the connector(s) may have loose, corroded or damaged terminals, or terminals pushed back in the
connector. Repair the wiring harness as necessary. The system should communicate with the front-ECU normally.
STEP 8. Check the ETACS-ECU connector D-224 for loose, corroded or damaged terminals, or terminals pushed back in the connector.
Q: Is ETACS-ECU connector D-224 in good condition?
YES: Go to Step 9.
NO: Repair or replace the damaged component(s). Refer to Harness Connector Inspection. The system should communicate with the front-ECU
normally.
