Montero V6-3.8L SOHC (2005)
STEP 10. Check the harness wiring from ETACS-ECU connector D-222 (terminal 4) to front passenger's door lock actuator connector H-24
(terminal 4).
NOTE: Also check junction block connector D-217 and intermediate connector D-15 for loose, corroded, or damaged terminals, or terminals pushed
back in the connector. If junction block connector D-217 or intermediate connector D-15 is damaged, repair or replace the damaged component(s) as
described in Harness Connector Inspection.
Q: Is the harness wiring from ETACS-ECU connector D-222 (terminal 4) to front passenger's door lock actuator connector H-24 (terminal 4) in good
condition?
YES: Go to Step 11.
NO: The harness wiring may be damaged or the connectors may have loose, corroded or damaged terminals, or terminals pushed back in the
connector. Repair the harness wiring as necessary. After repairs have been made, verify that all the doors can now be locked and unlocked normally.
