mitsubishi Workshop Repair Guides

Mitsubishi Workshop Service and Repair Manuals

Initial Inspection and Diagnostic Overview|Page 2548 > < Initial Inspection and Diagnostic Overview|Page 2546
Page 89
background image

2. Follow the given table to check the rear passenger's door lock actuator (RH) for correct operation.

Q: Is the rear passenger's seat door lock actuator (RH) normal?

YES: Go to Step 19.

NO: Replace the rear passenger's seat door lock actuator (RH). Verify that all the doors can be locked and unlocked normally.

STEP 19. Check ETACS-ECU connector D-222 for loose, corroded or damaged terminals, or terminals pushed back in the connector.

Q: Is ETACS-ECU connector D-222 in good condition?

YES: Go to Step 20.

NO: Repair or replace the damaged component(s). Refer to Harness Connector Inspection. After repairs have been made, verify that all the doors can
now be locked and unlocked normally.

Initial Inspection and Diagnostic Overview|Page 2548 > < Initial Inspection and Diagnostic Overview|Page 2546