Montero V6-3.8L SOHC (2005)
STEP 6. Check the wiring harness between power window relay connector D-219 (terminal 5) and fusible link (4).
NOTE: Also check junction block connector D-221 and intermediate connector D-28 for loose, corroded or damaged terminals, or terminals pushed
back in the connectors. If junction block connector D-221 or intermediate connector D-28 is damaged, repair or replace the damaged component(s) as
described in Harness Connector Inspection.
Q: Is the wiring harness between power window relay connector D-219 (terminal 5) and fusible link (4) in good condition?
YES: No action is necessary and testing is complete.
NO: The wiring harness may be damaged or the connector(s) may have loose, corroded or damaged terminals, or terminals pushed back in the
connector. Repair the wiring harness as necessary. Verify that the power windows function should now work normally.
