Montero V6-3.8L SOHC (2005)
STEP 7. Check front power window motor (RH) connector H-17 for loose, corroded or damaged terminals, or terminals pushed back in the
connector.
Q: Is front power window motor (RH) connector H-17 in good condition?
YES: Go to Step 8.
NO: Repair or replace the damaged component(s). Refer to Harness Connector Inspection. Verify that the front power window sub-switch (RH)
should now work normally.
STEP 8. Check the front power window motor (RH).
1. Remove the front power regulator assembly (RH). Refer to passenger's Door-Door Glass and Regulator.
2. Connect a battery to the motor terminal, and check that the motor runs freely.
Q: Is the front power window motor (RH) normal?
YES: Go to Step 9.
NO: Replace the front power regulator assembly (RH). Verify that the front power window sub-switch (RH) should now work normally.
STEP 9. Check at front power window sub-switch connector H-16 in order to check the power window relay circuit of the power supply to the
front power window sub-switch (RH).