Montero V6-3.8L SOHC (2005)
Q: Is the harness wiring between front power window main switch (RH) connector H-16 (terminal 4) and front power window motor (RH) connector
H-17 (terminal 1) in good condition?
YES: Go to Step 17.
NO: The wiring harness may be damaged or the connector(s) may have loose, corroded or damaged terminals, or terminals pushed back in the
connector. Repair the wiring harness as necessary. Verify that the front power window sub-switch (RH) should now work normally.
STEP 17. Check the harness wiring between front power window sub-switch (RH) connector H-16 (terminal 7) and front power window motor
(RH) connector H-17 (terminal 2).
Q: Is the harness wiring between front power window main switch (RH) connector H-16 (terminal 7) and front power window motor (RH) connector
H-17 (terminal 2) in good condition?
YES: No action is necessary and testing is complete.
NO: The wiring harness may be damaged or the connector(s) may have loose, corroded or damaged terminals, or terminals pushed back in the
connector. Repair the wiring harness as necessary. Verify that the front power window sub-switch (RH) should now work normally.
STEP 18. Check rear power window sub-switch (LH) connector H-02 for loose, corroded or damaged terminals, or terminals pushed back in
the connector.
Q: Is rear power window sub-switch (LH) connector H-02 in good condition?
YES: Go to Step 19.
NO: Repair or replace the damaged component(s). Refer to Harness Connector Inspection. Verify that the rear power window sub-switch (LH) should
now work normally.
Part 2 of 3
STEP 19. Check the rear power window sub-switch (LH) for continuity.
