Montero V6-3.8L SOHC (2005)
STEP 5. Check the wiring harness between windshield wiper motor connector B-12 (terminal 1) and front-ECU connector A-08X (terminal 28).
NOTE: Also check intermediate connector A-05 for loose, corroded, or damaged terminals, or terminals pushed back in the connector. If intermediate
connector A-05 is damaged, repair or replace the damaged component(s) as described in Harness Connector Inspection.
Q: Is the wiring harness between windshield wiper motor connector B-12 (terminal 1) and front-ECU connector A-08X (terminal 28) in good condition?
YES: Go to Step 6.
NO: The wiring harness may be damaged or the connector(s) may have loose, corroded or damaged terminals, or terminals pushed back in the
connector. Repair the wiring harness as necessary. Verify that the windshield wiper operates normally when the windshield wiper switch is moved to
each position.
