Montero V6-3.8L SOHC (2005)
STEP 6. Check the wiring harness between windshield wiper motor connector B-12 (terminal 4) and front-ECU connector A-08X (terminal 27).
Q: Is the wiring harness between windshield wiper motor connector B-12 (terminal 4) and front-ECU connector A-08X (terminal 27) in good condition?
YES: No action is necessary and testing is complete.
NO: The wiring harness may be damaged or the connector(s) may have loose, corroded or damaged terminals, or terminals pushed back in the
connector. Repair the wiring harness as necessary. Verify that the windshield wiper operates normally when the windshield wiper switch is moved to
each position.
Inspection Procedure G-4
Windshield Wiper and Washer: The windshield wipers do not stop at the specified park position.