Montero V6-3.8L SOHC (2005)
STEP 9. Check the wiring harness between windshield washer motor connector A-33 (terminal 1) and front-ECU connector A-08X (terminal
21).
Q: Is the wiring harness between windshield washer motor connector A-33 (terminal 1) and front-ECU connector A-08X (terminal 21) in good
condition?
YES: No action is necessary and testing is complete.
NO: The wiring harness may be damaged or the connector(s) may have loose, corroded or damaged terminals, or terminals pushed back in the
connector. Repair the wiring harness as necessary. Verify that the windshield washer works normally.
Inspection Procedure H-1
Rear Wiper and Washer: Rear wiper does not work at all.