Montero V6-3.8L SOHC (2005)
STEP 49. Check the wiring harness between side marker light (LH) connector G-02 (terminal 1) and front-ECU connector A-07X (terminal 8).
NOTE: Also check intermediate connectors D-28 and D-125 for loose, corroded, or damaged terminals, or terminals pushed back in the connector. If
intermediate connector D-28 or D-125 is damaged, repair or replace the damaged component(s) as described in Harness Connector Inspection.
Q: Is the wiring harness between side marker light (LH) connector G-02 (terminal 1) and front-ECU connector A-07X (terminal 8) in good condition?
YES: Replace the license plate light socket. Verify that the side marker light (LH) illuminates normally.
NO: The wiring harness may be damaged or the connector(s) may have loose, corroded or damaged terminals, or terminals pushed back in the
connector. Repair the wiring harness as necessary. Verify that the side marker light (LH) illuminates normally.
STEP 50. Check the side marker light bulb (RH).
1. Remove the side marker light bulb (RH).
2. Verify that the side marker light bulb (RH) is not damaged or burned out.
