Montero V6-3.8L SOHC (2005)
STEP 5. Check the wiring harness between fog light (LH) connector A-21 (terminal 2) and ground.
NOTE: Also check intermediate connector A-25 for loose, corroded, or damaged terminals, or terminals pushed back in the connector. If intermediate
connector A-25 is damaged, repair or replace the damaged component(s) as described in Harness Connector Inspection.
Q: Is the wiring harness between fog light (LH) connector A-21 (terminal 2) and ground in good condition?
YES: No action is necessary and testing is complete.
NO: The wiring harness may be damaged or the connector(s) may have loose, corroded or damaged terminals, or terminals pushed back in the
connector. Repair the wiring harness as necessary. Verify that the fog lights illuminate normally.
STEP 6. Check joint connector (2) A-15 for loose, corroded or damaged terminals, or terminals pushed back in the connector.
Q: Is joint connector (2) A-15 in good condition?
YES: Go to Step 7.
NO: Repair or replace the damaged component(s). Refer to Harness Connector Inspection. Verify that the fog lights illuminate normally.
