Montero V6-3.8L SOHC (2005)
YES: No action is necessary and testing is complete.
NO: The wiring harness may be damaged or the connector(s) may have loose, corroded or damaged terminals, or terminals pushed back in the
connector. Repair the wiring harness as necessary. Verify that the fog lights illuminate normally.
STEP 22. Check joint connector (2) A-15 for loose, corroded or damaged terminals, or terminals pushed back in the connector.
Q: Is joint connector (2) A-15 in good condition?
YES: Go to Step 23.
NO: Repair or replace the damaged component(s). Refer to Harness Connector Inspection. Verify that the fog lights illuminate normally.
STEP 23. Check the wiring harness between joint connector (2) A-15 (terminal 1) and relay box (fuse No. 20).
Q: Is the wiring harness between joint connector (2) A-15 (terminal 1) and relay box (fuse No. 20) in good condition?
YES: No action is necessary and testing is complete.
NO: The wiring harness may be damaged or the connector(s) may have loose, corroded or damaged terminals, or terminals pushed back in the
connector. Repair the wiring harness as necessary. Verify that the fog lights illuminate normally.
Part 1 of 3
Interior Light: The dome light do not illuminate or go out normally.
