mitsubishi Workshop Repair Guides

Mitsubishi Workshop Service and Repair Manuals

Initial Inspection and Diagnostic Overview|Page 2839 > < Initial Inspection and Diagnostic Overview|Page 2837
Page 380
background image

STEP 41. Check the wiring harness between rear personal light (RH) connector F-04 (terminal 2) and ground.

NOTE:  Also check intermediate connectors D-26 for loose, corroded, or damaged terminals, or terminals pushed back in the connector. If intermediate
connector D-26 is damaged, repair or replace the damaged component(s) as described in Harness Connector Inspection.

Q: Is the wiring harness between rear personal light (LH) connector (terminal 2) and ground in good condition?

YES: No action to be taken.

NO: Repair the wiring harness. Verify that the rear personal light (RH) illuminates normally.

Inspection Procedure M-2

Interior Light: Dome light dimming function does not work normally.

Initial Inspection and Diagnostic Overview|Page 2839 > < Initial Inspection and Diagnostic Overview|Page 2837