Montero V6-3.8L SOHC (2005)
Q: Is the measured voltage approximately 12 volts (battery positive voltage)?
YES: Go to Step 8.
NO: Go to Step 7.
STEP 7. Check the wiring harness between theft-alarm indicator light connector D-105 (terminal 1) and the fusible link (1).
NOTE: Also check intermediate connector D-28 for loose, corroded, or damaged terminals, or terminals pushed back in the connector. If intermediate
connector D-28 is damaged, repair or replace the damaged component(s) as described in Harness Connector Inspection.
Q: Is the wiring harness between theft-alarm indicator light connector D-105 (terminal 1) and the fusible link (1) in good condition?
YES: No action is necessary and testing is complete.
NO: The wiring harness may be damaged or the connector(s) may have loose, corroded or damaged terminals, or terminals pushed back in the
connector. Repair the wiring harness as necessary. The theft-alarm indicator light should illuminate, and the theft-alarm system should be set normally.