Montero V6-3.8L SOHC (2005)
STEP 5. Check driver's seat belt switch connector F-18 and ETACS-ECU connector D-224 for loose, corroded or damaged terminals, or
terminals pushed back in the connector.
Q: Are driver's seat belt switch connector F-18 and ETACS-ECU connector D-224 in good condition?
YES: Go to Step 6.
NO: Repair or replace the damaged component(s). Refer to Harness Connector Inspection. If the functions, which are described in "CIRCUIT
OPERATION", work normally, the input signal from the driver's seat belt switch should be normal.
