Montero V6-3.8L SOHC (2005)
STEP 8. Check front passenger's door lock actuator switch connector H-24 for loose, corroded or damaged terminals, or terminals pushed back
in the connector.
Q: Is front passenger's door lock actuator switch connector H-24 in good condition?
YES: Go to Step 9.
NO: Repair or replace the damaged component(s). Refer to Harness Connector Inspection. If the functions, which are described in "CIRCUIT
OPERATION", work normally, the input signal from the front passenger's door lock actuator switch should be normal.
STEP 9. Check the front passenger's door lock actuator switch.
Disconnect front passenger's door lock actuator switch connector H-24. Then check continuity between the switch terminals.
Q: Is the front passenger's door lock actuator switch in good condition?
YES: Go to Step 10.
NO: Replace the front passenger's seat door lock actuator switch. If the functions, which are described in "CIRCUIT OPERATION", work normally,
the input signal from the front passenger's door lock actuator switch should be normal.
STEP 10. Check the ground circuit to the front passenger's door lock actuator switch. Test at front passenger's door lock actuator switch
connector H-24.
1. Disconnect front passenger's door lock actuator switch connector H-24 and measure the resistance available at the wiring harness side of the
connector.
