Montero V6-3.8L SOHC (2005)
CAUTION: Do not drop the injector.
INSTALLATION SERVICE POINT
>>A<< FUEL PIPE/INJECTORS/FUEL PRESSURE REGULATOR/FUEL HIGH-PRESSURE HOSE INSTALLATION
CAUTION: Do not let the engine oil get into the fuel rail. Or the injectors will be damaged.
1. Apply a drop of new engine oil to the O-rings.
2. Turn the fuel pipe to the right and left to install to the fuel rails. Repeat for injectors, fuel pressure regulator and fuel high-pressure hose.
Be careful not to damage the O-ring. After installing, check that the item turns smoothly.
3. If it does not turn smoothly, the O-ring may be trapped, remove the item, re-install it into the fuel rails and check again.
4. Tighten the fuel pipe, fuel high-pressure hose and fuel pressure regulator to the specified torque.
Tightening torque:
9.0 ± 1.0 N m (80 ± 9 in-lb) <Fuel pipe and fuel pressure regulator>
5.0 ± 1.0 N m (44 ± 9 in-lb) <Fuel high-pressure hose>