Montero V6-3.8L SOHC (2005)
4. Check that the accelerator pedal arm touches the full-closed stopper.
5. Turn the ignition switch to the ON position, (but do not start the engine.)
6. Turn the accelerator pedal position sensor until the output from accelerator pedal position sensor (main) satisfies the standard value.
Standard value: 0.905 - 1.165 volts
7. Tighten the accelerator pedal position sensor mounting bolts to specified torque.
Tightening torque: 3.5 ± 1.0 N.m (31 ± 8 in.lb)
8. Install the accelerator pedal complete.
