Montero V6-3.8L SOHC (2005)
Fuel Pressure Release: Service and Repair
FUEL PUMP CONNECTOR DISCONNECTION (HOW TO REDUCE PRESSURIZED FUEL LINES)
When removing the fuel pipe, hose, etc., release fuel pressure to prevent fuel spray.
1. Turn the ignition switch to the "LOCK" (OFF) position.
2. Fold down the second seat.
3. Remove the service hole cover (upper) and packing.
4. Remove the service hole cover (lower) and packing.
5. Disconnect fuel pump module connector.
6. Start the engine and let it run until it stops naturally. Turn the ignition switch to the "LOCK" (OFF) position.
7. Connect the fuel pump module connector.