Montero V6-3.8L SOHC (2005)
Impact Sensor: Testing and Inspection
Front Impact Sensors
INSPECTION
WARNING: If a dent, crack, deformation or rust is detected, replace with a new sensor.
1. Check the front impact sensor for dents, cracks, deformation or rust.
WARNING: Always replace the sensor with a new one of the resistance is not within the standard value.
2. Measure the resistance between the terminals and check whether it is within the standard value.
Standard value: 820 ± 82 Ohm
3. Check for continuity between the terminal and the bracket. When there is continuity, it shows insufficient insulation of the sensor. Replace the
sensor with a new one.
4. Deformation and rust on the headlight support panel.
