Montero V6-3.8L SOHC (2005)
Yaw Rate Sensor: Service and Repair
Updated by TSB-09-35-005
G AND YAW RATE SENSOR
REMOVAL AND INSTALLATION
CAUTION: Do not drop or shock the G and yaw rate sensor.
INSTALLATION SERVICE POINT
>>A<< G AND YAW RATE SENSOR INITIALIZATION
If the G and yaw rate sensor is replaced, park the vehicle on a level surface and follow the procedure below.
1. Place the transmission shift selector lever in the "P" position.
2. Connect scan tool MB991958 to the data link connector.
3. Turn the ignition switch to the "ON" position.
4. Execute item No.16 "G SNSR: " on the Actuator test.