Montero V6-3.8L SOHC (2005)
Steering Angle Sensor: Testing and Inspection
REMOVAL AND INSTALLATION
INSTALLATION SERVICE POINT
>>A<< STEERING WHEEL SENSOR INITIALIZATION
When the battery is removed, the neutral point of the steering wheel sensor will be erased, the Active skid control system OFF indicator light will
illuminates and DTC 83 (ST NO ADJ) will be set. In this case, make the steering wheel sensor learn the neutral point by following one of the
procedures below.
Using scan tool MB991958
1. Connect scan tool MB991958 to the data link connector.
2. Turn the ignition switch to the "ON" position.
3. Turn the steering wheel 8° or more, and then return it to the neutral (straight forward) position.
