Montero V6-3.8L SOHC (2005)
2. After special tool MB990560 has been installed as shown, tighten the nut of the special tool MB990560 until the portion of special tool
MB990560 touches the bearing outer race.
3. Press out the inner shaft from the bearing.
ASSEMBLY SERVICE POINTS
>>A<< DUST SEAL INSTALLATION
Press-fit the new dust seal into the housing tube by using special tools MB990938 and MB990955, until it is flush with the housing tube end face.
>>B<< DUST COVER INSTALLATION
Using a steel pipe, install a new dust cover onto the inner shaft.
>>C<< BEARING INSTALLATION
