Montero V6-3.8L SOHC (2005)
2. Check the condition of the tube. If crack, chip or deformation is found, replace the propeller shaft with new one. When flaw is found, confirm
whether there is any failure by using a dye penetrant. If a failure is found, replace the propeller shaft.
3. Measure the clearance (A) between the tube and the shaft at the end portion of the tube.
Standard value (A): 0.2 - 0.5 mm (0.008 - 0.020 inch)
4. If the standard value is not met, replace the rear propeller shaft.
